Paradichlorobenzene Crystals - Paranitrochloro Benzene, Paradichlorobenzene Suppliers, Exporter India

Home | Profile | Contact Us | Enquiry Form

Japanese

French

Deutsch

Español

English

N-Paraffins

Solvents

Acrylates

Plasticizer

Benzene

Chlorinated Paraffins oil

Monochlorobenzene

Paradichlorobenzene

Orthodichlorobenzene

Orthonitrochlorobenzene

Paranitrochlorobenzene

PVC Compounds – Footwear

Grade (Microlon)

PVC Compounds – Footwear

Grade (Compact)

PVC Compounds Profile for

Automotive Applications

PVC Compounds - Wire &

Cable

TPR Compounds

PP Filled Compounds

Di-butyl Phthalate Dnbp

NP9

Laboratary Chemicals Reagents

Specification Of Chlorobenzene

Name Of Product	Chloro Benzene
Formula.	C ₆H ₅C₁
Molecular Weight	112.56
Physical Appearance	Clear Colourless liquid
Specific Gravity	1.099 at 27 C
Purity	Min 99.8% by GCL
Insoluble	Soluble in organic solvents and insoluble in water
Moisture	350 PPM (Max.)
Impurity	Di -Chloro Benzene -0.18% Max. Benzene -0.07% Max.
Acidity	Nil
Distillation Range	129.5 to 131 C
Safety Precaution	Inflammable, Avoid Skin Contact
Packing	Loose in Tanker loads. Also available in MS/HDPE Drums
Application	Manufacture of phenol, aniline, and solvents for paint , heat transfer medium. Also pesticides and dye Intermediates
Cas No	00108 -90-7

» Send Enquiry

Specification Of Para Nitro Toluene

Name Of Product	Para Nitro Toluene
Trade Name	PNT
Formula	C ₇H ₇NO₂
Molecular Weight	137
Physical Appearance	Pale Yellow Solid (Flakes)
Assay, By GLC	99.60% min
Crystallisation Point	51₀C
Specific Gravity	1.16
Impurities	MNT : 0.30% max ONT : 0.10% max Moisture : 0.10% max
Application	Bulk drug intermediate, Dye Intermediates, Optical whitener, Intermediate for explosives.

» Send Enquiry

Specification Of Vinyl Sulphone Ester

Name Of Product	Vinyl Sulphone Ester
Trade Name.	PARA BASE ESTER
Chemical Name	4-Amino Phenyl 4-BHydroxy Ethyl Sulfone Sulfate Ester
Synonyms	Para Amino Phenyl B Hydroxy Ethyl Sulfate Ester.
Formula	C ₈H₁₁No₆S₂
Molecular Weight	281.31
Physical Appearance	Dry Powder
Description	White to Greyish Powder
Assay, By Nitrite Value	96 % Minimum
Insoluble	1 % Maximum
Iron Content	700 PPM Maximum
Free Acitic Acid	0.7% Maximum
Mesh Size	100% Pass (20 Mesh) 75% Pass (50 Mesh)
ASSAY, HPCL AREA @254NM	96% Minimum
1. NON-ESTER	2.5% Maximum
2. N-ACETYL	1.5% Maximum
3. VINYL	0.5% Maximum
4. DIMER	2.0% Maximum
Sales Basis	On real content 100% basis

» Send Enquiry

Specification XLPE Compounds (KLJ 013 XL/ KLJ 015 XL)

Apratim-01XL/ Apratim-03XL Combination mixed @ 140°c at 95:5 ratio for 5 minutes & compressed Molded to a sheet of 1.4 mm thickness. Cured by immersion in water at 90°c for 3 hrs.

Sr. No.	Properties	Unit	Typical Value	Test Method
1	Tensile strength	Mpa	14-17	IS-10810(PART7)
2	Elongation At Break	%	350-400	IS-10810(PART7)
3	Hot set @ Break
A	Hot Elongation After 15min	%	60-90	IS-10810(PART30)
B	Permanent set after 5 Min	%	± 5	IS-10810(PART 30)
4	Oven Ageing at 135C,168 Hrs
A	Variation In Tensile Strength	%	± 15	IS-10810(PART11)
B	Variation In Elongation	%	± 15	IS-10810(PART11)
5	Volume Resistivity	OHM CH	1*1016	IS-1991
6	Dissipation Factor	-	4X10-4	ASTM-D-150
7	Dielectric Constant	-	2.1-2-4	ASTM-D-150

Apratim-02XL / Apratim-03 XL Combination mixed @ 140°c at 95:5 ratio for 5 minutes & compressed Molded to a sheet of 1.4 mm thickness. Cured by immersion in water at 90c for 3 hrs.

Sr. No.	Properties	Unit	Typical Value	Test Method
1	Tensile strength	Mpa	14-17	S-10810(PART7)
2	Elongation At Break	%	350-400	S-10810(PART7)
3	Hot set @Break
A	Hot Elongation After 15min	%	60-90	S-10810(PART30)
B	Permanent set after 5 Min	%	± 5	S-10810(PART 30)
4	Oven Ageing at 135c,168 Hrs
A	Variation in Tensile Strength	%	± 15	S-10810(PART11)
B	Variation in Elongation	%	± 15	±15S –10810 (PART11)
5	Volume Resistivity	OHM CH	1*1016	IS-1991
6	Dissipation Factor	-	4X10-4	ASTM-D-150
7	Dielectric Constant	-	2.1-2-4	ASTM-D-150

» Send Enquiry

Click here for

Import

Export

Home | Profile | Contact Us | Enquiry Form