Send Email
Language Converter :

Apratim International

Home Apratim Our Products Apratim N-paraffins

Plasticizers

Plasticizers are extensively utilized in various domains for improvising the fluidity or plasticity of materials especially made of plastic and PVC. The plasticizer makes polymer impact proof, thermal & light stable, flexible and strongly attached to resin. We provide a wide range of these additives applicable for different utilities. These additives are widely used in wire jacketing, PVC cable, synthetic rubber, chlorinated rubber, nitrocellulose polystyrene, PVC resins, footwear, vinyl flooring, medical equipments, adhesives, perfumes, non-toxic food containers, automobile parts, tubes and rubber belts.

  • Low toxicity
  • Excellent thermal stability
  • Resistant to impact
  • Strong attachment with resin
  • Rubber belts
  • Leather Cloth
  • Adhesives
  • Footwear
  • Tubes
  • Automobile Parts
  • Cables & Flexible PVC Films
  • Vinyl Flooring
  • PVC resins
  • Medical equipments

Specification

  DI-ISO- DECYL PHTHALATE DIDP DI-ISO- NONYL PHTHALATE DINP DI-2ETHYL HEXYL PHTHALATE DOP DI-BUTYL PHTHALATE DBP(M) DI-n-BUTYL PHTHALATE D-n-BP DI-ISO- BUTYL PHTHALATE DIBP DI-ETHYL PHTHALATE DEP DI-METHYL PHTHALATE DMP
Appearance Water white clear liquid              
COLOUR IN MAX HAZEN UNIT 20 20 20 20 20 20 20 20
VOLATILE LOSS (130ºC for 3 hrs. % By Mass) Max. 0.1 0.1 0.1 0.1 (110ºC for 2 Hours) 0.1 (110ºC for 2 Hours) 0.1 (110ºC for 2 Hours) 0.2 (110ºC for 1 Hour) 0.5 (110ºC for 1 Hour)
ACIDITY %  (AS ACID) BY MASS, Max. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
ACIDITY AFTER HEAT TREATMENT (1800C FOR 2 HRS.) %  MASS, Max 0.03 0.03 0.03 0.03 0.03 0.03 0.05 0.05
HEAT STABILITY at 180ºC for 2 Hrs. NO CHANGE IN COLOUR NO  CHANGE IN COLOUR NO CHANGE IN COLOUR NO  CHANGE IN COLOUR NO CHANGE IN COLOUR (150ºC,  2 Hrs.) NO CHANGE IN COLOUR (150ºC,  2 Hrs.) 35 Hu. (150ºC,  2 Hrs.) 35 Hu. (150ºC,  2 Hrs.)
SPECIFIC GRAVITY AT  27º C 0.964 ± 0.004 0.973 ±  0.003 0.983 ± 0.003 1.035 ±  0.005 1.043 ± 0.002 1.035 ± 0.005 1.117 ± 0.003 1.185 ±  0.005
REFRACTIVE INDEX AT 27º C 1.4845 ±  0.0015 1.487 ±  0.003 1.486 ±  0.002 1.492 ±  0.003 1.491 ±  0.001 1.490 ±  0.004 1.5 ±  0.002 1.512 ±  0.004
ESTER VALUE (mg KOH/gm) 251.5 ± 2.5 267.5 ± 2.5 287 ± 3 385 ± 9 403 ± 2 402 ± 3 503 ± 3 575 ± 3
ESTER CONTENT % BY WEIGHT, Min. 99.5 99.5 99.5 99.5 99.5 99.5 99.5 99.5
PLASTICIZING ESTERS By GLC Min. % 99.5 99.5 99.5 99.5 99.5 99.5 99.5 99.5
MOISTURE % By mass Max 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.15
VISCOSITY at 20ºC in CPS 108 ± 2 79 ± 3 82 ± 2 23 ± 2 21 ± 2 34.5 ± 1.5 12 ± 2 ---
BOILING AT ATM. PR (in ºC) --- 400 386 --- 340 327 293 282
Residual Alcohol % Max. 0.1 0.1 0.1 0.05 0.05 0.05 0.02 0.02




Chlorinated Paraffins Oil

Chlorinated Paraffins Oil having chemical formula CnH2n-4CI6 (n-10 to 15) is white to pale yellow colored viscous liquid that extensively utilized as plasticizer for different products. This range of oils is ideally used in synthetic rubber, chlorinated rubber, sealants, PVC cable, wires, paint industries, adhesives, caulks, PVC flooring, footwear, toys and textile industries.

  • Resistance against extrusion
  • Low volatility
  • Flame resistant
  • Moisture proof
  • Excellent chemical stability
  • Non-toxic
  • Chemical non-resistive
  • Paints
  • Rubber
  • Styrene isobutene coatings
  • As fire retardant for plastic products
  • Lubrication additive
  • PVC flooring
  • PVC cables & wires
  • Sealants
  • Caulks
  • Footwear
  • Toys


Packing

  • 250 Kgs. New HM-HDPE Drums
  • 20 ft. Flexi-Tanks
  • 1000 kg HDPE IBCs
  • 20 ft. ISO Tanks

Specification

Characteristics

Chlorinated paraffin 45%

Chlorinated paraffin 52%

Specifications

Specifications

Appearance

White to Pale yellow viscous

White to Pale yellow viscous

Chlorine Content

45 ± 1%

52% ± 2

Paraffin Range

C14 - C17

C14 - C17

pH

6.0 - 6.5

6.0 - 6.5

Sp. Gravity at 27 ËšC

1.20 ± 0.02

1.270 ± 0.02

Viscosity at 27 ËšC (poise)

6 ± 3

18 ± 6

Color (HU) Max

80

100

Heat Stability at 180 ËšC for 1. Hr

Color turns to dark yellow / Brown

Color turns to dark yellow / Brown

Volatile loss (% Max)

4 % (at 180 ËšC / 4 Hrs.)

2.5% (at 180 ËšC / 4 Hrs.)

Refractive Index at 27 ËšC

1.498 ± 0.002

1.506 ± 0.002

Free mineral Acidity

0.001% Max.

0.001%





XLPE Compounds

The concluded range of DBP, DINP, DIBP, DOA, DOP, DEP, DMP, XLPE compound is a white colored clear liquid that extensively finds applications like plasticizer and used in various domains. These compounds are widely utilized in various domains for vinyl flooring, non-toxic food containers, perfumes, tubes, automobile parts, footwear, leather cloth, flexible PVC films, medical accessories and cable & wire as an adhesive.

  • High temperature resistant
  • Moisture proof
  • Excellent current carrying efficiency
  • Fine extrudability
  • Thermal diffusivity
  • Optimum mechanical characteristics
  • Low permeability to water
  • Chemical resistant to oil, alkali, acids and organic solvents
  • Wires & cables
  • Medical tubing
  • Medical bloodbags
  • Rubber products
  • Automobile parts
  • Adhesives


Packing

  • Graft Polymer : Nett 25 Kg in Polyethylene lined HDPE laminated Polypropylene Bag.
  • Catalyst M.B. : Nett 25 kg in Polyethylene lined coloured HDPE laminated Polypropylene Bag.

Specification

S. No. PROPERTY SPECIFICATION UNITS TYPICAL VALUE
1 Specific Gravity 0.92±0.01 --- 0.92
2 Tensile Strength (Mpa) 13.5 (Min) N/mm2 17.4
3 Elongation at Break 250 (Min) % 455
4 Hot Set @200°C / 15 Minutes Load 20N/cm2 175 (Max) % 45
5 Permanent Elongation (Set) after cooling 15 (Max) % 2
6 Gel Content 70±5 % 68
7 Volume Resistivity @ 27°C 1 X 10  15  (Min) Ohm-Cm 1.6 X 10  17
8 Power Factor at 50 Hz at 23ºC --- --- 0
9 Permitivity at 50 Hz at 23ºC --- --- 2.2
10 Dielectric Strength at 20ºC --- Kv/mm 21
11 Cold Bend Temperature --- °C -70
After Ageing @ 135±3°C / 7 Days
12 Tensile Strength variation ±25 % -11
13 Elongation at Break variation ±25 % 2




PVC Compounds

PVC Compounds are available in powdered and granule form to meet with the application requirements of different industries. This range of compounds is ideally utilized for wire, extrusion and molding applications in automotive, medical equipments, hose & tubing, submersible pump, telecom cables, housing wiring, electrical connectors and various other consumer goods.

  • Excellent thermal stability
  • Impeccable electrical characteristics
  • Flexibility
  • Rigidness
  • Resistant to corrosion & scratch
  • Impact proof
  • Low volatile loss
  • Good mechanical properties
  • Moulding
  • Hose & Tubing
  • Medical equipments
  • Automobile parts
  • Industrial products
  • Nose mask
  • Drip chamber
  • Sports accessories

Specification

S. No.

NEW GRADE

PROPERTIES

Colour

SPECIFIC 
GRAVITY

HARDNESS (Shore A)

THERMAL STABILITY @ 200°C

TENSILE STRENTH

ELONGATION
AT BREAK

VOLATILE
LOSS @130°C/3 hrs.

RECOMMENDED
PROCESSING
TEMPRATURE



APPLICATIONS

Units

--

---

Nos.

Minutes (min)

Kg/cm2 (min)

% (min)

% (max)

°C

TEST METHOD

Visual

ASTM D792

ASTM 
D2240

IS 
5831

ASTM D638

ASTM 
D638

KPA/QCD/
WIN-2

---

 

OLD GRADE

01

TFG-35

TFG-47M

Translucent

1.12±0.02

35±3

25

50

450

0.75

135-155

Moulding /Nipples

02

TFG-36

TFG-47N

Translucent

1.12±0.02

36±3

25

50

450

0.75

135-155

Moulding /Nipples

03

TFG-42

TFG-47B

Translucent

1.12±0.02

42±3

20

50

450

0.75

135-155

Moulding /Nipples

04

TFG-45

TFG-40S

Translucent

1.16±0.02

45±3

10

50

400

0.75

135-155

Moulding / Soft Tubing

05

TFG-55

TFG-50 Black

Black

1.20±0.02

55±3

15

90

350

0.75

135-150

Moulding /Syringe Gaskets

06

TFG-57

TFG-55R

Translucent

1.18±0.02

57±3

15

90

350

0.75

135-155

Nose mask

07

TFG-60

TFG-60E (A)

Translucent

1.18±0.02

60±3

15

100

400

0.75

125-140

Tubing

08

TFG-65

TFG-2W

Translucent

1.19±0.02

65±3

10

100

350

0.75

135-155

Tubing,Sealing,moulding, cap liners

09

TFG-70

TFG-70E (A)

Translucent

1.20±0.02

70±3

15

130

380

0.5

130-155

Tubing

10

TGF-70M

TGF-70M

Translucent

1.19±0.02

70±3

15

130

350

0.5

130-155

Component Moulding

11

TFG-75

TFG-75E/M/TFG-43

Translucent

1.22±0.02

75±3

15

140

360

0.5

130-155

Tubing

12

TGF-78

TGF-78E

Translucent

1.23±0.02

78±3

15

150

350

0.5

130-150

Tubing

13

TFG-80

TFG-80 E/B/TFG-42

Translucent

1.23±0.02

80±3

15

150

350

0.5

130-155

Moulding / Tubing

14

TFG-85

TFG-85 E

Translucent

1.23±0.02

85±3

15

160

325

0.5

130-155

Tubing

15

TFG-90

TFG-90 M/R

Translucent

1.26±0.02

90±3

15

200

250

0.5

135-150

Moulding,Drip Chamber

16

TFG-100

TFG-100B

Translucent

1.31±0.02

100±3

15

275

200

0.5

135-155

Rigid Moulding Component






Epoxidised Soyabean Oil

ESO is finely produced from high quality natural raw materials and has passed the toxicity tests of Disease Control Center, Shanghai Food and Drug Administration and SGS.

  • Appearance: Light yellow sticky oily liquid
  • HS code: 15180000
  • CAS No.: 8013-07-8
  • Molecular formula: C57H106O10
  • Molecular weight: about 1000
  • Fluid point: -3°C,
  • Boiling point: 150°(0.5Kpa),
  • Viscosity: 325mpa.s,
  • Refractive Index: 1.472 (25°C)
  • Solubility in water : < 0.01% (25°C)
  • Solubility of water: 0.55% (25°C)

It is the most widely used PVC nontoxic plasticizer and stabilizer. It is particularly consistent with PVC and has low volatility and mobility. Its high thermal stability, light stability and good resistance to water and oil endow the products with better mechanical strength, weather resisting property and electrical property. Its non-toxicity makes it the internationally acknowledged chemical aid for foodstuff wrapper. It can be applied to all PVC products, such as, foodstuff wrapper, medical ware, pellicle, sheet material, tubular goods, sealing plate of icebox, artificial leather, floor leather, wire and cable material, plastic wallpaper and other daily use plastic products. It can also be applied to making special printing ink, oil paint, coating material, synthetic rubber, and liquid compound stabilizer and so on.

Standard: accordant to Q/JAHG002

Standard Item

Normal Grade

Color Shade, (Pt- Co ) max

180

Density ( 20C) g /cm3

0.985~0.995

Acidity, mg KOH/g max

0.50

Flashing Point C min

290

Loss upon Heat% max

0.30

Iodine Value% max

5.0

Epoxy Value,% min ASTMD1625-04

6.6



Package

  • Net weight 200KG iron drum
  • 1000KG IBC tank or Flexi-bag in Bulk


Product Range

Sasol

Exclusive marketing representatives of Sasol Wax (South Africa) for the marketing of N-Paraffins in India.



Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name